Wine Gift Boxes
Wine gift boxes are the hardest working packaging you will buy. They have to survive a courier van that gets loaded three times before it reaches the customer. They have to look like the bottle inside cost twice as much. And they have to open cleanly, without tearing, in front of the person who actually paid for the wine. Our wine gift boxes are built around that moment.
We make them as rigid lid-and-base, magnetic closure, or drawer structures. Single bottle for a thank-you gift. Two bottles for a housewarming. Four or six for a corporate order or a mixed case. Most buyers start with the bottle count and the unboxing feel they want, then we work backward to the structure and the insert.
How to Choose
Start with the bottle. A 750 ml Burgundy bottle is not the same shape as a 750 ml Bordeaux bottle. Shoulders sit at different heights. If you send us the bottle sample or its exact dimensions, we build the insert around that bottle. If you guess, you get a bottle that rattles or a neck that flops sideways. That is the difference between a gift and a return.
Then decide what happens when the box opens. A magnetic closure lid swings up and stays shut on its own. A drawer slides out and presents the bottle lying down. A lid-and-base box is the classic two-piece rigid box; it feels substantial but has no built-in closure. For a single bottle under $30 retail, a drawer is often overkill. For two bottles with a paper bag, a lid-and-base with a ribbon pull is usually the right call.
Do not choose the facing paper before you choose the structure. A high-gloss black paper shows fingerprints on a magnetic lid. A textured leather-look paper hides them. Flocked paper inside the lid looks expensive but adds cost and does nothing for protection. If the box will sit on a retail shelf, pick a finish that still looks clean after ten people have picked it up and put it back.
Buyer questions
Can you make a gift box that fits both a standard 750 ml bottle and a slightly taller sparkling wine bottle?
Yes, but you have to accept a compromise. We can design the insert with a removable spacer or a taller cavity with a foam pad at the base. The standard bottle will sit a bit lower. The alternative is two inserts for the same outer box, which adds tooling cost but gives you a perfect fit for both.
What is the minimum quantity for a custom wine gift box?
We offer flexible MOQ for custom orders. The structure and the insert are the main cost drivers. A simple lid-and-base box with a paper insert can run in smaller batches than a magnetic closure box with a flocked tray. Tell us your bottle count and quantity, and we will tell you what makes sense.
Do you provide a sample before mass production?
Yes. We make a blank sample first so you can check the structure, the insert fit, and the magnet strength. Then a printed sample for color and finish approval. You sign off on the printed sample, and we keep it as the reference for the production run.
What We Control
The board is greyboard, 1200 g minimum. For a two-bottle box we go heavier, 1400 g, because the span is longer and the lid will sag if the board is too light. The facing paper is 157 g specialty or coated paper, never recycled greyboard, never high-moisture paper. Those two rules keep the corners crisp and the lid flat after six months in a warehouse.
The insert holds the bottle at four points: neck, shoulder, body, and base. No unsupported neck or shoulder. Our control tolerance is plus or minus 1 mm on the insert and plus or minus 2 mm on the box body. Before a batch ships, we run our in-house checks: a 1.2 m six-face drop test with the bottle loaded, stacking top load of 40 kg or more for 24 hours, and a vibration simulation for truck and sea freight. The bottle must not move. We also check the hardest colors to hold: black, deep blue, burgundy. Pantone matching, first-article approval, mid-run sampling.
Get a quote for wine gift boxes
Send the bottle size or a sample, quantity and a reference design. We reply with structure options and pricing.
- Email[email protected]