Double-Door Rigid Wine Gift Box for Two Bottles

This rigid wine box opens like a cabinet, with two symmetrical doors that swing out to reveal a pair of bottles. It's built from high-strength multi-layer cardboard, so it holds its shape on a retail shelf and protects the glass inside. The double-door structure adds a ceremonial moment to unboxing, which is why it works for limited releases, corporate gifts, and premium sets. You can specify the dimensions, the facing paper, the finish, and the closure. No recycled greyboard goes into it. Our board standard is 1200 g minimum, with 157 g facing paper, and every insert is checked so the bottles stay put.

Double-door structure. Two doors open from the center to present the bottles. It feels like a reveal, not just a box opening.
Rigid build. Multi-layer cardboard keeps the box square and protects the bottles. Soft-touch or textured finishes are available on the facing.
Closure options. Magnetic closures are an option. You can also add ribbon pulls or metallic elements if your design calls for them.
Custom finishing. Foil stamping, embossing, and UV coating are available. We match Pantone colors and sample before mass production.
Bottle fit checks. Inserts are built to hold the bottle at four points. We shake, tilt, and invert the loaded box to confirm no movement.

Get a Quote for this box More cardboard wine boxes

Specifications

Category: Cardboard wine box
Bottles: 2

Customisation

You can set the dimensions to fit your bottles, choose the facing paper and finish, and add your logo with foil stamping, embossing, or UV coating. The insert is built around your bottle shape. Magnetic closure, ribbon pulls, and metallic elements are options. Send your bottle sample or dimensions, a reference design, and your quantity. We'll make a blank sample for structure, then a printed sample for visual approval.

How the box is built

The base is high-strength multi-layer rigid cardboard. We use greyboard at 1200 g minimum, never recycled board, and face it with specialty paper at 157 g minimum. That combination gives you a box that won't flex when a customer picks it up by one corner. Double doors are cut from the same board and attached so they align when closed.

Fine edges and clean joints are part of the standard build. If you want a magnetic closure, the magnets sit in the door edges with a position tolerance of plus or minus 1 mm. Corners are checked at 90 degrees when the box is erected. The finish can be soft-touch, textured, or a coated paper depending on the look you're after.

How the bottles sit

This box is made for two bottles. The insert is built around your bottle dimensions, whether that's a standard Bordeaux shape or something taller. The rule we work to is four-point contact: the insert holds the bottle at the neck and the base, with no unsupported shoulder. That's what stops a bottle from shifting in transit or when a customer opens the doors. Our control tolerance on inserts is plus or minus 1 mm, and the box body is plus or minus 2 mm. Before shipping, we run our in-house checks: shake the loaded box for 10 seconds, tilt it 45 degrees, and invert it. If the bottle moves, the insert gets reworked. It's a simple test, but it catches most fit problems before they reach you.

Where this box fits

Buyers use this box for two-bottle gift sets, holiday releases, and corporate gifting. The double-door opening makes it a good choice when the unboxing is part of the product experience, like a limited edition or a brand anniversary set. It's less suited to high-volume shipping because the doors add material and assembly time. If you need something for everyday courier handling, a single-piece shipping box with foam inserts is the better call. For retail display or a gift that sits on a desk, this structure earns its cost.

Buyer questions

Can this box hold two different bottle shapes?

Yes. We build the insert from your bottle dimensions, so a Burgundy shape and a tall Riesling can sit side by side. Send both bottle samples or their exact measurements, and we'll position the insert to keep each bottle at four contact points. The double-door structure doesn't change; only the insert layout does.

What are the magnetic closure options?

We can put magnets in the door edges so they snap shut and stay closed. The magnet position tolerance is plus or minus 1 mm, and we check alignment during assembly. If you prefer no magnets, we can use ribbon ties or a simple friction fit. Tell us your preference when you send the design brief.

How do you make sure the box survives shipping?

We do three in-house checks before packing: a 1.2 m six-face drop test with bottles loaded, a top-load stack of 40 kg for 24 hours, and a vibration simulation for truck and sea transit. The box must show no structural damage and the bottles must not move. If it fails, we adjust the board or the insert.